JAI AT-200GE - Manual (Page 6)

AT-200GE
- 4 -
JAI GigE Vision Ⓡ Camera operation manuals
To understand and operate this JAI GigE Vision Ⓡ camera properly, JAI provides the following
manuals.
User’s manual (this booklet) Describes functions and operation of the hardware
JAI SDK & Control Tool User Guide Describes functions and operation of the Control Tool
JAI SDK Getting Started Guide
Describes the network interface
User’s manual is available at
www.jai.com
JAI SDK & Control Tool User Guide and JAI SDK Getting Started Guide are provided with the
JAI SDK which is available at
www.jai.com .
Introduction
GigE Vision is the new standard interface using Gigabit Ethernet for machine vision
applications and it was mainly set up by AIA (Automated Imaging Association) members. GigE
Vision is capable of transmitting large amounts of uncompressed image data through an
inexpensive general purpose LAN cable for a long distance.
GigE Vision also supports the GenICam
TM standard which is mainly set up by the EMVA
(European Machine Vision Association). The purpose of the GenICam standard is to provide a
common program interface for various machine vision cameras. By using GenICam standard,
cameras from different manufactures can seamlessly connect in one platform.
For details about the GigE Vision standard, please visit the AIA web site,
www.machinvisiononline.org and for GenICam, the EMVA web site, www.genicam.org .
JAI GigE Vision cameras comply with both the GigE Vision standard and the GenICam standard.