IBM ADSL Bridge/ Router Heritage - Manual (Page 66)

Heritage Series ADSL Bridge/ Router
7-1 Command Sets for Command Line Interface
Chapter 7 Command Sets for
Command Line
Interface
Command line interface conventions
! Command line length may be up to 90 characters long.
! The command line interface is case-sensitive
! Parameters in between [ and ] are optional
! Parameters in between < and > must be entered
! The command line interface prompts for commands with a prompt
that indicates the identity of the system. It determines how to
indicate the identity as follows :
# If the SNMP MIB variable sysName.0 exists and is
non-empty, that is used first;
# Otherwise, if a local IP address exists, that is used;
# Otherwise, the local MAC address is used.
For example, the prompt might look like one of the following
DSL>
192.168.7.1>
0:30:eb:ff:0:ff>