IBM ADSL Bridge/ Router Heritage - Manual (Page 34)

Heritage Series ADSL Bridge/ Router
3-3 Basic Configurations
3.2 Bridged RFC1483
(Default
configuration for Router)
[System configuration]
[ISP/DSLAM configuration]
IP address : 192.168.7.3
Subnet mask : 255.255.255.0
Gateway : None
[Local PC configuration]
IP address : 192.168.7.2
Subnet mask : 255.255.255.0
Gateway : None
The Router already default to support the RFC 1483. However, you can use
following procedure to reconfigure the Router to support the RFC 1483
again.
> ip device flush
> bridge device add edd
> bridge device add bun/port=r1483/rfc1483=true/mode=/
txvpi=/txvci=/rxvpi=/rxvci=
( is the encapsulation mode of RFC1483, it can be one of LlcBridged and
VcMuxBridged, and the setting of encapsulation mode is case sensitivity. is
the VPI value, and is the VCI value)
> config save
> restart
DSLAM/NSP
192.168.7.3
Ethernet Port
Ethernet Port
192.168.7.1
192.168.7.2
//r1483
//
r1483