beautypg.com

IBM ADSL Bridge/ Router Heritage User Manual

Page 61

background image

5-2

Managing the xDSL Router

5.2 Upgrading on-board flash memory from

Ethernet network

You can update the on-board flash memory after you booting the new
firmware from the Ethernet network by issue the following commands.

> home

> flashfs rewrite boot.bin

(

this command is available for update boot code only)

> flashfs update

> flashfs ls


You should see some messages about the file name and file sizes that
stored in the Router. If you get “

no flash content

” something went

wrong.