IBM ADSL Bridge/ Router Heritage - Manual (Page 57)

4-12 Advanced Configurations
• PPTP dial in
In the following example, the PC connects to the xDSL Router firstly must
be configured as:
IP address of PNS
: 192.168.10.1
Subnet mask of PNS : 255.255.255.0
Gateway of PNS : 192.168.10.2
IP address of PAC : 192.168.10.2
> ip device add Ethernet ether //edd 192.168.10.2
↵
> config save
↵
> restart
↵
> ppp 2 pvc 0 32 listen
↵
(Set channel 2 to VPI=0, VCI=32)
> ppp 2 interface 0
↵
> ppp 2 tunnel 1 pptp in
↵
> ppp 2 enable
↵
> pptp bind 192.168.10.2
↵
> pptp 1 create 192.168.10.1
↵
> config save
↵
> restart
↵
The PPTP configuration can be removed by following procedure. Please
ensure to remove the PPTP configuration before set the xDSL Router to
other configuration
• Remove PPTP either dial out or dial in
> ip device flush
↵
> config save
↵
> restart
↵
> ppp 2 pvc none
↵
> ppp 2 interface 0
↵
> ppp 2 tunnel 0
↵
> ppp 2 disable
↵
> pptp 1 delete
↵