IBM ADSL Bridge/ Router Heritage - Manual (Page 33)

3-2 Basic Configurations
3.1 Factory default configuration
The Router is shipped with factory default settings. You may or may not
need to change them depend on what kind of network that your Router is
going to be installed.
Configuration item
Default settings of xDSL Router
Ethernet Interface IP address 192.168.7.1
Network Mask 255.255.255.0
xDSL interface IP address None
Network Mask None
ATM VPI/VCI number 0/32
Data Encapsulation Protocol RFC1483
Machine Name DSL
Domain name Disabled
DHCP Server Disabled
DHCP Client Disabled
DNS Relay Disabled
NAT Disabled
RIP Disabled
IP filtering
Disabled
Bridge filtering Disabled
Spanning Tree Disabled
Telnet login password admin
SNMP access password admin