IBM ADSL Bridge/ Router Heritage - Manual (Page 4)

4.2 Enables NAT to RFC1483, Classic IP (RFC1577), PPP over
ATM (RFC2364) and PPP over Ethernet (RFC2516) in
Routing mode
4-4
4.3 Changing DHCP server configuration 4-6
4.4 Changing DHCP client configuration 4-9
4.5 PPTP Tunneling Configuration 4-11
Chapter 5 Managing The xDSL Router
5-1
5.1 Booting the xDSL Router from Ethernet
Network 5-1
5.2 Upgrading on-board flash memory from Ethernet
Network 5-2
5.3 SNMP 5-3
Chapter 6 xDSL Link Performance Statistics 6-1
Chapter 7 Command Sets for Command Line
Interface 7-1
Command Line Interface Conventions 7-1
Basic system command sets 7-2
Commands for ISFS and FLASHFS process 7-5
Commands for Bridge process 7-7
Commands for DHCP server process 7-16
Commands for DHCP client process 7-18
Commands for IP process 7-20
Commands for NAT process 7-38
Commands for PPP process 7-42
Commands for SNMP process 7-52
Commands for DSL process 7-54
Chapter 8 DHCP Server Operation
8-1
8.1 DHCP Server Overview 8-1
8.2 DHCP Server Configuration 8-2
8.3 Informal configuration guide 8-2