4 configuration software and utilities, Hot keys – Intel SHG2 User Manual
Page 55
55
4 Configuration Software and Utilities
This chapter describes the Power-On Self-Test (POST) and server configuration utilities. The table
below briefly describes the utilities.
Table 4.
Configuration Utilities
Utility Description
Page
BIOS Setup
Used for modifying server board set features, including setting time,
date, and system passwords; setting the boot device priority;
configuring the diskette drive and serial ports; and enabling the SCSI
BIOS and system management features.
57
System Setup Utility
(SSU)
Used for viewing and clearing the system event log, viewing the
system management FRU information, or viewing the system
management SDR repository.
58
FRUSDR Load Utility
Used for updating the Field Replacement Unit (FRU), Sensor Data
Record (SDR), and SM BIOS (SMB) flash components.
69
BIOS Upgrade Utility
Used to upgrade the BIOS.
73
Firmware Update Utility
Used to update the Firmware.
76
Adaptec SCSI Utility
Used to configure or view the settings of the SCSI host adapters and
onboard SCSI devices in the server.
78
Hot Keys
Use the keyboard’s numeric pad to enter numbers and symbols.
Table 5.
Hot Keys
To do this:
Press these keys
Clear memory and reload the operating
system - this is a system reset.
Secure your system immediately.