Intel SHG2 - Manual (Page 23)

Server Board installation 23
Installation Notes
Installation Process Quick Reference
Step Where the information is located
Install the primary processor This guide
Install the secondary processor (optional) This guide
Install memory This guide
Remove the access cover Your chassis manual
Install the I/O shield This guide
Rearrange the standoffs This guide
Install the server board This guide
Connect cables to the server board This guide and your chassis manual
Finish setting up your chassis Your chassis manual
Installation Procedures
Installing the I/O Gasket and Shield
✏
NOTE
An ATX 2.03-compliant I/O shield is provided with the server board. The
shield is required by Electromagnetic Interference (EMI) regulations to
minimize EMI. If the shield does not fit the chassis, obtain a properly sized
shield from the chassis supplier.
The shield fits the rectangular opening in the back of a chassis. The shield has cutouts that match
the I/O ports. Install the shield from inside the chassis.