Setting up isdn b channels as ras ports – Interphase Tech iSPAN 5535 PRI User Manual
Page 58
Installing and Setting Up the Drivers
38
Interphase Corporation
When RAS installation is complete, a message informs
you that Remote Access Service has been successfully
installed, and reminds you to use Remote Access
Admin or User Manager in the Administrative Tools
Folder to assign RAS permissions to users.
4. Click OK.
To continue the software installation, set up ISDN B channels
as RAS ports, as described in the next section.
Setting Up ISDN B Channels as RAS Ports
After RAS is installed, you can set up ISDN B channels as
RAS ports, using the Add RAS Device dialog:
Figure 4-12. Add RAS Device
This dialog appears after you respond OK to the message that
Remote Access Service must be invoked or that Remote
Access Service has been successfully installed.
To set up the IDSN B channels:
1. Click OK to select the first ISDN B channel (ISDN1-
SynWan).