Interphase Tech iSPAN 5535 PRI - Manual (Page 138)

Procedures
118 Interphase Corporation
Open Remote
Access Setup 1. From the Start menu, select Settings, and then
Control Panel.
2. Double-click the Network icon, and select the
Services tab to display the Services dialog:
3. From the Network Services list, select Remote
Access Service, and then click Properties.
Figure G-1. Remote Access Setup
Bind a protocol to
an ISDN RAS Port 1. Open the Remote Access Setup dialog. (See Open
Remote Access Setup on page 118). Then click
Network.
NetBEUI, IPX/SPX, and TCP/IP protocols are
available. RAS allows you to configure them
differently depending on the connection type: dial-
in or dial-out.
2. Select the protocol(s) you want to bind to the
adapter.
NOTE: The more protocols you bind, the more
memory RAS uses.
If you want to... Do this...