Interphase Tech iSPAN 5535 PRI - Manual (Page 140)

Procedures
120 Interphase Corporation
Configure a
multilink
connection The Multilink PPP protocol aggregates several ISDN
B channels to increase the bandwidth of PPP links.
To enable this option, do the following:
1. In the Network configuration:
a. From the Start menu, select Settings, and then
Control Panel.
b. Double-click the Network icon, and select the
Services tab to display the Services dialog.
c. From the Network Services list, select Remote
Access Service, and then click Properties.
d. In the Remote Access Setup dialog, click
Network to display the Network Configuration
dialog.
e. Select the Enable Multilink option.
f. Save these settings and restart your computer.
2. In the Phonebook entry:
During phonebook entry creation, select the
Multiple Lines option.
If you want to... Do this...