Interphase Tech iSPAN 5535 PRI - Manual (Page 57)

Chapter 4: Installing the Software
iSPAN PRI PCI ISDN Users Guide 37
To set up RAS support properties:
1. Click OK to confirm the displayed configuration.
– If Remote Access Service is installed on your
system, a message informs you that RAS support
setup is complete, and states that Remote Access
Services (RAS) setup must now be invoked.
Click OK to update the ISDN port list in RAS setup.
Then skip to Setting Up ISDN B Channels as RAS
Ports on page 38.
– If Remote Access Service is not yet installed on
your system, a message informs you that RAS
support setup is complete, and states that Remote
Access Services (RAS) setup must now be installed:
Click OK, and continue to step 2.
2. When a message informs you that Setup needs to copy
Windows NT files, enter the complete path if you want
Setup to find the files in a location other than the
default:
Figure 4-11. Windows NT Setup Message
3. Click Continue to complete the RAS installation.