Intel Express 5800/120Ld - Manual (Page 67)

Configuring Your System 3-17
Adaptec SCSI Utility Configuration Settings
The following keys are active for all Adaptec SCSI Utility screens:
Key Action
Arrows Up and down arrows move from one parameter to another within a screen.
ENTER Displays options for a configurable parameter. Selects an option.
ESC Moves back to previous screen or parameter or EXIT if at the Main menu.
F5 Switches between color and monochrome.
F6 Resets to host adapter defaults.
The Table 3-1 shows the normal settings for the Adaptec SCSI Utility and
provides a place for you to record any changes you make to these settings.
Table 3-1. Adaptec SCSI Utility Setup Configurations
OPTION
RECOMMENDED SETTING
OR DISPLAY ONLY YOUR
CONFIGURATION
SCSI Bus Interface Definitions
Host Adapter SCSI ID 7
SCSI Parity Checking Enabled
Host Adapter SCSI Termination Enabled
Additional Options
Boot Device Options Press ENTER for menu
Boot Channel A First
Boot SCSI ID 0
Boot LUN Number 0
SCSI Device Configuration Press ENTER for menu
Sync Transfer Rate (MB/Sec) 160
Initiate Wide Negotiation Yes
Enable Disconnection Yes
Send Start Unit Command Yes
Enable Write Back Cache No
BIOS Multiple LUN Support No 1
Include in BIOS Scan Yes 1
Advanced Configuration Options Press ENTER for menu.
Plug and Play SCAM Support Disabled
Reset SCSI Bus at IC Initialization Enabled
1 No effect if BIOS is disabled.