IBM x Series 200 - Manual (Page 35)

Diagnostics
27
Event ID Type Description
01 Error Explanation: Team name and physical adapter name are
the same. This is an invalid configuration.
Action:
Reconfigure the adapter team by double-clicking
the PROSet icon in the control panel.
02 Error Explanation: Unable to allocate required resources.
Action: Free some memory resources and restart.
03 Error Explanation: Unable to read required registry parameters.
Action: Reconfigure the adapter team by double-clicking
the PROSet icon in the control panel.
04 Error Explanation: Unable to bind to physical adapter.
Action: Reconfigure the adapter team by double-clicking
the PROSet icon in the control panel.
05 Error Explanation: Unable to initialize an adapter team.
Action: Reconfigure the adapter team by double-clicking
the PROSet icon in the control panel.
06 Informational Explanation: Team nn. Primary adapter is initialized.
Action: None.
07 Informational Explanation: Team nn. Secondary adapter is initialized.
Action: None.
08 Informational Explanation: Team nn. Virtual adapter or Team is
initialized.
Action:
None.
09 Informational Explanation: Team nn. Primary adapter is switching over.
Action: None.
10 Warning Explanation: Team nn. Adapter link down.
Action: Make sure the adapter is functioning properly.
11 Informational Explanation: Team nn. Secondary adapter took over.
Action: None.
12 Warning Explanation: Team nn. Secondary adapter is deactivated
from the Team.
Action:
Make sure the secondary adapter is functioning
properly and that the adapter cable is securely connected to
the LAN.
13 Informational Explanation: Team nn. Secondary adapter has rejoined the
Team.
Action:
None.
14 Informational Explanation: Team nn. Secondary adapter link is up.
Action: None.
15 Error Explanation: Team nn. The last adapter has lost its link.
Network connection has been lost.
Action:
Shut down the server and replace the adapters;
then, restart the server to reestablish the connection.
16 Informational Explanation: Team nn. An adapter has reestablished the
link. Network connection has been restored.
Action:
None.
Table 6. NDIS (Windows NT or Windows 2000) driver teaming messages for the
Ethernet controller.