IBM x Series 200 User Manual
Page 106
98
Hardware Maintenance Manual: xSeries 200
00019501
(Microprocessor is not
functioning - check VRM and
processor LEDs)
1.
Microprocessor
2.
System Board
00019701
(Microprocessor failed BIST)
1.
Microprocessor
2.
System Board
00180100
(No room for PCI option
ROM)
1.
Run Configuration/Setup
2.
Failing Adapter
3.
System Board
00180200
(No more I/O space available
for PCI adapter)
1.
Run Configuration/Setup
2.
Failing Adapter
3.
System Board
00180300
(No more memory (above
1MB for PCI adapter))
1.
Run Configuration/Setup
2.
Failing Adapter
3.
System Board
00180400
(No more memory (below
1MB for PCI adapter))
1.
Run Configuration/Setup
2.
Failing Adapter
3.
System Board
00180500
(PCI option ROM checksum
error)
1.
Remove Failing PCI Card
2.
System Board
00180600
(PCI device built-in self test
failure)
1.
Run Configuration/Setup
2.
Failing Adapter
3.
System Board
00180700
(xxxxyyyy planar PCI device
not responding (where xxxx
is PCI vendor ID and yyyy is
PCI device ID))
1.
System Board
2.
PCI Card
00180800
(Unsupported PCI device
installed)
1.
System Board
2.
PCI Card
00181000
(PCI error)
1.
System Board
2.
PCI Card
01295085
(ECC checking hardware test
error)
1.
System Board
2.
Microprocessor
01298001
(No update data for
microprocessor)
1.
Ensure all microprocessors are the same stepping level and cache size.
2.
Microprocessor
Error Code/Symptom
FRU/Action