Intel CELERON PCI-6886 - Manual (Page 49)

39
1. Choose the Set Password option from the CMOS Setup Utility
main menu and press .
2. When you see “Enter Password,” enter the desired password and
press .
3. At the “Confirm Password” prompt, retype the desired password,
then press .
4. Select Save to CMOS and EXIT, type , then .
To Change Password
1. Choose the Set Password option from the CMOS Setup Utility
main menu and press .
2. When you see “Enter Password,” enter the existing password and
press .
3. You will see “Confirm Password.” Type it again, and press
.
4. Select Set Password again, and at the “Enter Password” prompt,
enter the new password and press .
5. At the “Confirm Password” prompt, retype the new password, and
press .
Figure 4.11: Set password