2 display interface, 3 dvi, 4 solid state disk – Intel CELERON PCI-6886 User Manual
Page 14: 5 pci bus ethernet interface, 6 mechanical and environmental, Display interface, Solid state disk, Pci bus ethernet interface, Mechanical and environmental
PCI-6886 User’s Manual
4
1.3.2 Display Interface
• Chipset: Intel 852GM
• Memory size: Optimized Shared Memory Architecture,supports up to
64 MB frame buffer using system memory
• Display modes:
CRT Modes: up to 1600 x 1200 @32bpp (85Hz);
LCD Modes: up to UXGA panel resolutipn with frequency
range from 25-MHz to 112-MHz
• LCD Interface: 2 Channel LVDS (up to 36-bit)
• LVDS: Hirose connector support dual channel LVDS panel
1.3.3 DVI
• Chipset: Chrontel CH7009
• Drives a DVI display at a pixel rate of up to 165MHz, supporting
UXGA resolution displays
• DVI hot plug detection
• Compliant with DVI Specification 1.0
1.3.4 Solid State Disk
• Supports CompactFlash Type I/II disks
1.3.5 PCI bus Ethernet interface
• Chipset: Intel 82540EM(Gigabit), Intel 82551ER/82551QM(optional)
• Connection: on-board RJ-45
• Interface: IEEE 802.3 z/ab(1000BASE-T) or IEEE 802.3u(100BASE-
T) protocol compatible
• BootROM: build-in-system(Supported by 82540EM and
82551QM(optional))
1.3.6 Mechanical and Environmental
• Dimensions (L x W): 185 x 122 mm(7.3” x 4.8”)
• Power supply voltage: +5 V, +5V STB, +12V
• Power requirements:
Max:(Run Kpower under Win2000+SP4)
2.42A@5V,0.32A@12V,(w/CeleronM 600M0L2+512M)
Typical:(Run Kpower under Win2000+SP4)
1.91A@5V,0.31A@12V,(w/CeleronM 600M0L2+512M)
• Operating temperature: 0 ~ 60°C (32 ~ 140°F),operation
• Operating humidity: 0% ~ 90% Relative Humidity, Non condensing