Intel CELERON PCI-6886 - Manual (Page 13)

3 Chapter 1 General Information
• Supports 4 x USB2.0 port
• Supports 2 Channel 36bits LVDS for LCD
• Supports 400MHz Front Side Bus
• Supports 200-MHz, and 266-MHz DDR SDRAM
1.3 Specifications
1.3.1 Standard SBC Functions
• CPU:Intel Celeron M 600MHz(0 KB) onboard:(PCI-6886F-
M0A1,PCI-6886FG-M0A1). Supports 400MHz FSB processors
• System chipsets: Intel 852GM + 6300ESB
• BIOS: Award 4Mbit Flash memory
• System memory: 200 pin SODIMMx2, support Non-ECC double data
rate (DDR) 128MB to 2GB, accepts 128/256/512/1000MB DDR
200/266 DRAM
• 2nd cache memory: N/A
• Enhanced IDE Interface: Supports two enhanced IDE channels. Pri-
mary channel supports ATA-100 mode; Secondary channel only
supports ATA-33 and PIO mode. CFC card occupies secondary
master
• Serial Ports: Four serial ports: COM1, COM3, COM4: RS232, COM2:
RS232/422/485
• Parallel Ports: one parallel port, support SPP/EPP/ECP
• Keyboard/Mouse Connector:Supports standard PC/AT Keyboard and
a PS/2 Mouse
• Power Management: Supports Power Saving Mode including Normal/
Standard/Suspend modes. APM 1.2 compliant.
• FDD interface: Support up to two FDD devices
• DIO interface: Supports 8 general purpose input/output ports
• Watchdog Timer: 0~255 Sec, System reset
• Expansion Interface: 32-bit PCI Slot, support PCI 2.2
• Battery: Lithium 3V/195 mAH
• USB: 4 USB ports, USB 2.0 compliant
• SATA Chip: Intel 6300ESB
• SATA Connector: Two COMAX C504C (180 angle) connectors, sup-
ports data transfer rates up to 150 Mbyte/s, support RAID 0.1