IBM 1220 - Manual (Page 92)

90
Performing
Self Test
What this message means:
The printer is running the series of start-up tests it performs after it is turned on.
What you can do:
Wait for the message to clear.
See also:
Aligning the image transfer unit
Power Saver
What this message means:
The printer is ready to receive and process data. It is reducing its electricity consumption while
idle. If the printer remains inactive for the period of time specified in the Power Saver menu
item (20 minutes is the factory default), the
Power Saver message replaces the Ready
message on the display.
What you can do:
• Send a job to print.
• Press Go to quickly warm the printer to normal operating temperature and display the Ready
message.
Printer Calibrating
What this message means:
The printer is adjusting the color tables to correct variations caused by environmental
conditions.
What you can do:
Wait for the message to clear.
See also:
Color Menu