IBM 1220 - Manual (Page 142)

140
Staple Job
Purpose:
To set stapling as the default for all print jobs. (Select stapling from the printer driver if you want to
staple only specific jobs.)
Values:
Staple Prime Src
Purpose:
To specify the paper source you want the printer to use when it primes the stapler. When a staple
cartridge is replaced or a staple jam is cleared, the printer may need to prime the stapler by stapling a
sheet of paper several times.
Values:
Off* Does not staple print jobs.
On Staples each print job sent to the printer.
Tray (Tray 1*) Selects paper from the specified tray.
MP Feeder Selects paper from the multipurpose feeder.