IBM 1220 - Manual (Page 161)

159
Printer Usage
Purpose:
To determine the behavior of the image transfer unit during printing.
Values:
Resource Save
Purpose:
To determine what the printer does with downloaded resources, such as fonts and macros stored in
RAM, if the printer receives a job that requires more memory than is available.
Values:
Staple Alarm
Purpose:
To specify how the printer responds when it is out of staples.
Values:
See also:
Auto Continue
Max Speed The image transfer unit is engaged throughout the print job.
Max Yield* The image transfer unit position is engaged based on page content. This may
extend the life of certain print supplies.
Off* Printer retains downloaded resources only until memory is needed. It then deletes those
resources associated with the inactive printer language.
On Printer retains all downloaded resources for all printer languages during language changes
and printer resets. If the printer runs out of memory,
38 Memory Full is displayed.
Off* Load Staples is displayed until someone loads staples. If an Auto Continue value
is selected from the Setup Menu, the printer resumes printing after the specified
timeout value.
Single Printer stops printing, displays Load Staples , and sounds three quick beeps.
Continuous Printer stops printing, displays Load Staples , and repeats three beeps every 10
seconds until the staple cartridge is replaced.