Disabling menus, Disk corrupted. reformat, Disk recovery x/5 yyy – IBM 1220 User Manual
Page 81
79
Disabling Menus
What this message means:
The printer is responding to a request to disable the menus.
What you can do:
Wait for the message to clear.
Note: While the menus are disabled, you cannot change the printer settings from the
operator panel.
See also:
Disabling the operator panel menus
Disk Corrupted.
Reformat?
What this message means:
The printer has attempted a disk recovery process and cannot repair the disk.
What you can do:
•
Press
Go
to reformat the disk and delete all files currently stored on the disk.
•
Press
Stop
to clear the message without reformatting the disk. The printer may display
Disk
Recovery
and attempt to recover the disk.
See also:
Disk Recovery
x/5 yyy%
What this message means:
The printer is attempting to recover the hard disk. Disk recovery takes place in five phases; the
second line on the operator panel display shows the percent complete of the current phase.
What you can do:
Wait for the message to clear.
W
ARNING
:
Do not turn the printer off while this message is displayed.