Intel SE8500HW4 - Manual (Page 119)

Intel® Server Board Set SE8500HW4 BIOS User Interface
Revision 1.0
Intel order number D22893-001
107
Table 81. COM1 Console Redirection Menu
Setup Item Option Default Help Text Comment
BIOS Console
Redirection Enabled/
Disabled Disabled Enables performing server
management tasks over
the serial port.
Flow Control None
RTS/CTS
XON/XOFF
CTS/RTS + CD
None
Selects serial port
communication protocol
handshaking type.
Baud Rate 9600/19.2K/38.4
K/57.6K/115.2K 19.2K Selects serial port
transmission speed. The
speed must be matched on
the other side. Long or
noisy lines may require
lower speeds.
Terminal Type VT100/
VT100+/
VT-UTF8/
PC-ANSI
VT100+ VT100/VT100+ selection
only works with English
language. VT-UTF8 uses
Unicode. PC-ANSI is the
standard PC-type terminal.
Table 82. FRU Information Menu
Setup Item Option Default Help Text Comment
Board Part
Number the FRU> Info Only
Board Serial
Number the FRU> Info Only
System Part
Number the FRU> Info Only
System Serial
Number the FRU> Info Only
Chassis Part
Number the FRU> Info Only
Chassis Serial
Number the FRU> Info Only
BMC Device ID the BMC> Device identification number
of the Baseboard
Management Controller Info Only
BMC Firmware
Revision the BMC> Info Only
BMC Device
Revision the BMC Info Only
PIA Revision the BMC> Info Only
SDR Revision the BMC> Info Only
Hot Swap
Controller the Hot Swap Revision of the Hot Swap
Back Plane (HSBP) controller Info Only