MITSUBISHI ELECTRIC PAC-YG31CDA - Manual (Page 28)

8.7.2 G-50A NO. and IP-Address
Set the number and IP-Address of G-50A connected to the system.
Item Contents Set value
No. (G-50A No.) *1
Set the number of G-50A connected to the
system. Default: Null
Range: 1 to 10
IP Address Input an IP address of the G-50A. *2 Default: [192.168.1.1]
Port No It is communication port number. It is fixed to 80.
*1: We recommend setting up the number of G-50A so that it may not overlap, when two or more BACnet IF
is being used.
*2: Refer to the operating manual of G-50A about the method of setting an IP address as G-50A.
8.7.3 Add/Modify/Delete Group
Set the group configuration connected to the G-50A.
(1) Add group
Click the [Group Add] button. The [G-50] window will open. →Refer to 8.7.4
(2) Modify group configuration
Select the [Group No.]. And click the [Group Modify] button.
The [G-50 Group] window will open. →Refer to 8.7.4
(3) Delete group
Select the [Group No.]. And click the [Group Delete] button.
The confirmation screen will open.
25