MITSUBISHI ELECTRIC PAC-YG31CDA - Manual (Page 26)

8.3 Windows Elements
The initial setup screen of SetBACnet is shown below.
Title bar:
Show the title of the
window.
Menu bar:
Show a list of function
that may be selected.
G-50A Tab:
Sets the unit
configuration in
BACnet IF.
System Tab:
Set the extended
functions.
BACnetTab:
Sets the parameter of
the BACnet
communication.
8.4 Open/Close file
The File menu contains items that allow you to start creating a file, save changes in your system setting, and
exit BACnetIF. The made file is used for the backup of the system etc.
[File] menu Contents
[New Settings] Open a new empty file
[Open Settings] Open a pre-existing file
[Save Settings] Save the current file (*.dat)
If you have not edited the file since you last saved, then a new empty file will appear in the
Main Window.
If you have edited the file since you last saved, then dialog boxes will open prompting you to
save the changes.
[Save Settings As] Save the current file under a new file name (*.dat)
The dialog box with a suggested file name will appear.
[Exports] Export is done to the CSV file.
[Properties] IP address of PC to which BACnetIF is set up is input.
[127.0.0.1] is input when set up to PC, as which BACnetIF and a setting tool are the same.
[Exit] THE BACnetIF program is ended.
8.5 Get/Put system settings
The [BACnetIF] menu contains the item that you forward the system set up information to BACnetIF, and
acquires it from BACnetIF.
[BACnetIF] menu Contents
[Get Settings] The system set up information is acquired from BACnetIF. (*1)
[Put Settings] The system set up information is forwarded to BACnetIF. (*1, *2)
*1 Internet Protocol address at the forwarding destination (acquisition source) is set with Properties of the File menu.
*2 Please restart BACnetIF, when a function and a system configuration are changed.
BACnet IF reads setting information at once at the time of starting.
23