MITSUBISHI ELECTRIC PAC-YG31CDA User Manual
Bacnet
Mitsubishi Electric Air Conditioning Network System
BACnet
TM
Interface: PAC-YG31CDA (Ver. 1.30)
Operation Manual
Contents
1.Safety Precautions ………1
2.System Requirements ………2
3.System Configuration ………4
4.Functional specification ………6
5.Installation ………16
6.Part Name and Functions ………20
7.Initial Startup and Shutdown ………22
8.System Setting Procedure ………22
9.Site Adjustment ………33
Appendix1: Auto Log – In Confirmation Method
Appendix2: Initial Value
Appendix3: Correcting the system setting data when
PC fails or is replaced.
Please read this manual before using the unit.
Please keep this manual for future use.
WT04221X03
2004-Mar. (Ver. 1.30)
Table of contents
Document Outline
- Mitsubishi Electric Air Conditioning Network System
- 2.1 Requirements (system recommendations)
- 2.2 Compatible Airconditioner
- 2.3 Restrictions
- 3.1 System Configuration Example
- 3.2 Hardware Connection Diagram
- 3.3 Group Configuration
- 4.1 Communication Protocol Specification
- 4.2 Object List
- 4.3 Object and Management Item
- 4.4 Service List
- 4.5 Service list for every object
- 4.6 Event Service specification
- 4.7 Function
- 4.8 Setting functional list
- 5.1 Pre-installation Steps
- 5.2 BACnet IF Setup
- 5.3 BACnet IF Uninstall
- 6.1 Window Elements
- 6.2 Basic Mouse Operation
- 7.1 Before Startup
- 7.2 Start up
- 7.3 Shutdown
- 8.1 Start Up [SetBACnet]
- 8.2 Shutdown [SetBACnet]
- 8.3 Windows Elements
- 8.4 Open/Close file
- 8.5 Get/Put system settings
- 8.6 System Setting Procedure
- 8.7 Setup for G-50A
- 8.8 Setup for BACnet
- Notification Class Setting
- 8.9 System Setup
- 9.1 Site Adjustment
- 9.2 Tools for Site Adjustment
- Step 1: Test operation from centralized controller G-50A
- 9.4 Step 2: Initial setting of BACnet IF
- 9.5 Setting Check
- 9.6 Step 3: Test operation from BMS (Building Management System)