MITSUBISHI ELECTRIC PAC-YG31CDA - Manual (Page 13)

Object Object type Instance
number
Management item Note
Prohibition of local operation
(filter reset)
Binary Value xxxx15 Inactive: Permit Active: Prohibit
Prohibition of local operation
(Set Temp.)
Binary Value xxxx16 Inactive: Permit Active: Prohibit
*3)
Communication State Binary Input xxxx20 Inactive: Normal Active:
Abnormalities
System Forced Off Binary Value xx9921 Inactive: Released Active: Effective
Air direction (setup) Multi-State Output xxxx22
01: Horizontal
02: Down 60%
03: Down 80%
04: Down100%
05: Swing *3)
Air direction (state) Multi-State Input xxxx23
01: Horizontal
02: Down 60%
03: Down 80%
04: Down100%
05: Swing *3)
Notification Class Notification Class 000003
Setting change of an instance
number is possible.
Device Device 000003
Setting change of an instance
number is possible.
*1) It can use, if dry operation use is set up.
*2) It can use, if use of Mid1/Mid2 is set up.
*3) The group of LC serves as an item with an invalid attribute.
*4) As for the operation mode of the group of LC, an attribute serves as ventilation fixation.
10