Multi-Tech Systems MT3410ZLX-T/2 - Manual (Page 78)

MultiMobile Owner’s Manual
78
Result Codes
In Command mode, the MT3410ZLX can send
information and status responses, or Result Codes,
to your computer. Result Codes are used by
communications programs and can also appear on
your monitor. The form of the Result Code
information displayed can be defined using the
Qn,
Vn, Wn and Xn commands.
Basic Result Codes
ATW0: report DTE rate
Example: CONNECT 57600
ATW2: report DCE rate
Example: CONNECT 28800
AT\V1: report connection protocol
CONNECT DTE_or_DCE_speed
connection_protocol
Example: CONNECT 57600/NONE for
normal mode connection
CONNECT 28800/MNP for MNP
connection
CONNECT 115200/LAP-M for V.42
LAPM connection