Multi-Tech Systems MT3410ZLX-T/2 - Manual (Page 62)

MultiMobile Owner’s Manual
62
Command Options Function & Description
En AT command echo options
E0 Echo disabled
E1* Echo enabled
Hn Switch-hook control
H0 Modem goes on-hook
H1 Modem goes off-hook
Mn Speaker control
M0 Speaker always off
M1 * Speaker on until carrier present
M2 Speaker always on
M3 Speaker off during dialing and on until
carrier present
Nn Select negotiate handshake
N0 When originating or answering,
handshake only at the communication
rate specified by S37 register and
“ATBn” and no fallback
N1 * When originating or answering, start
handshaking only at the
communication standard specified by
S37 register and “ATBn” During
handshake, fallback to a lower speed
may occur except in “AT\N1” mode
On Go on-line
O0 Return modem to a previously
established state
O1 Begin an equalizer retrain sequence,
then return to on-line state
O3 to O14 Force modem to a new rate that is
user defined. New rates are defined in
S62 register
P Enable pulse dialing
Qn Result code display options
Q0 * Result code enabled
* Factory default setting