Multi-Tech Systems MT3410ZLX-T/2 - Manual (Page 63)

63
Appendices
Command Options Function & Description
Q1 Result code disabled
T Enable tone dialing
Vn Result code form
V0 Display result code in numeric form
(see also the result code options table)
V1 * Display result code in verbose form
Wn Select extended result codes
W0 * CONNECT result code reports DTE
speed (see also the “Result Code
Options Table”)
W1 CONNECT result code reports DTE
speed; enable the CARRIER,
COMPRESSION, and PROTOCOL
extended result code
W2 CONNECT result code reports DCE
speed
Xn Select result codes/call progress
options
X0 Display CONNECT or “1” for all
speeds
X1 Display connect message according to
“ATW” and “AT\V”, blind dial, ignore
busy tone
X2 Display connect message according to
“ATW” and “AT\V”, wait for dial tone,
ignore busy tone
X3 Display connect message according to
“ATW” and “AT\V”, blind dial, check
busy tone after dialing
X4 * Display connect message according to
“ATW” and “AT\V”, wait for dial tone,
check busy tone after dialing
Zn Recall stored profile
Z0 Reset and recall user profile 0
Z1 Reset and recall user profile 1
* Factory default setting