Multi-Tech Systems MT3410ZLX-T/2 - Manual (Page 18)

MultiMobile Owner’s Manual
18
10. Press F10 to save to new configuration.
11. Highlight Install press here and press
to install. The program copies the necessary
files for NetWare Client.
12. Continue the installation procedure to
completion. On completion, a new NET.CFG file
is created in your DOS directory. Typically, this
file contains the following lines:
Link Driver LM28ODI
FRAME Ethernet_802.3
#FRAME Ethernet_802.2
13. Copy the file CARDEN.EXE and LMVXD.386
from the directory \ENABLER on the Driver
diskette to the NetWare Client directory.
14. Use a text editor to edit the STARTNET.BAT for
adding a running CARDEN command at the
beginning of the file. A sample STARTNET.BAT
for the ODI workstation is shown next:
CARDEN /IOP=nnn /IRQ=n /COM=n /MIR=n
SET NWLANGUAGE=ENGLISH
--(sets NetWare 4.X to English
language)
LSL --Link Support Layer Module
provided by Novell
LM28ODI --Hardware Specific Module
IPXODI --IPX Protocol Stack Module
provided by Novell
VLM --DOS Support Module provided
by Novell
F: --Change to connected device
LOGIN .ADMIN --Login to file server as user
ADMIN
15. Run STARTNET to access the Novell network.