Multi-Tech Systems MT3410ZLX-T/2 - Manual (Page 30)

MultiMobile Owner’s Manual
30
Determine if any third party generic enablers
installed on the PC. These are identified by a
search through the CONFIG.SYS file for the
following lines:
Vendor Device Loaded in CONFIG.SYS
Awards Software
DEVICE=C:\CARDWARE\PCENABLE.EXE
System Soft
DEVICE=C:\CARDSOFT\CARDID.EXE
Phoenix
DEVICE=C:\PCMPLUS\PCMSCD.EXE
If one of these lines exists in your CONFIG.SYS, it
can be used to enable the MT3410ZLX PC Card.
Follow the PCMCIA driver installation instructions in
the PC’s manual. If the PC Card drivers do not
support multi-function cards, use the Multi-Tech
supplied enabler.
Disable all current PC Card drivers by editing the
CONFIG.SYS and AUTOEXEC.BAT. If it is
necessary to keep these drivers for other adapters,
skip to next section.
1. Insert the Drivers disk in drive A:.
2. Type C: at the command prompt.
3. Type MD LMCARD to make a new directory.
4. Type COPY A:\ENABLER\*.* C:\LMCARD to
copy the enabler to your directory.
5. Modify the PATH= statement in your
AUTOEXEC.BAT to include the path
C:\LMCARD.
6. Change from PATH= to
PATH=;C:\LMCARD
7. Use CARDEN.EXE to enable MT3410ZLX
when the PC is loading Card Services.