MITSUBISHI ELECTRIC PD-5010 User Manual

Page 43

Information

RGB SELECT modes

One of these 6 modes must be selected in order to
display the following signals correctly:

AUTO .............

Select the suitable mode for the
specifications of input signals as
listed in the table “Computer input
signals supported by this system” on
page 55.

STILL ..............

To display VESA standard signals.
(Use this mode for a still image from
a computer.)

MOTION .........

The video signal (from a scan
converter) will be converted to RGB
signals to make the picture more
easily viewable. (Use this mode for a
motion image from a computer.)

WIDE1 ............

When an 852 dot

480 line signal

with a horizontal frequency of
31.7kHz is input, the image may be
compressed horizontally. To prevent
this, set RGB SELECT to WIDE1.

WIDE2 ............

When an 848 dot

480 line signal

with a horizontal frequency of 31.0
kHz is input, the image may be
compressed horizontally. To prevent
this, set RGB SELECT to WIDE2.

DTV ................

Set this mode when watching digital
broadcasting (480P).

See page 55 for the details of the above settings.

Restoring the factory default settings

To restore the original factory settings, go back to the
MAIN MENU. Select “FUNCTION,”and then select
“RESET”. Note that this also restores other settings to
the factory defaults.

Setting a computer image to the correct RGB select
screen
With the computer image, select the RGB Select mode
for a moving image such as (video) mode, wide mode or
digital broadcast.

Example: Setting the “RGB SELECT” mode to
“MOTION ”

Press the MENU/ENTER button on the remote control to
display the MAIN MENU on the screen, then...

1. Use the ▲ and ▼ buttons to select “OPTIONS”, then

press the MENU/ENTER button.
The “OPTIONS” screen appears.

2. Use the ▲ and ▼ buttons to select “RGB SELECT”.

O P T I O N S

: VIDEO1

: HD/DVD1

: RGB1

: RGB

AUTO

: 1080B

: ON

SEL.

ADJ.

RETURN

EXIT

AUDIO INPUT

AUDIO1

AUDIO2

AUDIO3

BNC SELECT

RGB SELECT

HD SELECT

PICTURE SIZE

3. To set the RGB select mode to “MOTION” ...

Use the

or buttons to select “MOTION”.

The mode switches as follows each time the

button is pressed:

AUTO STILL MOTION WIDE1 WIDE2 DTV