MITSUBISHI ELECTRIC PD-5010 - Manual (Page 33)

27
Information
Adjusting the Auto Picture
ON .................. The Picture ADJ and Fine Picture
adjustments are made automatically.
OFF ................ The Picture ADJ and Fine Picture
adjustments are made manually.
Adjusting the position of the image
V-POSITION ... Adjusts the vertical position of the
image.
H-POSITION ... Adjusts the horizontal position of the
image.
V-HEIGHT ...... Adjusts the vertical size of the image.
(Except for STRETCHED mode)
H-WIDTH ........ Adjusts the horizontal size of the
image. (Except for STRETCHED
mode)
FINE PICTURE* .... Adjusts for flickering.
PICTURE ADJ* .... Adjusts image resolution.
* The Picture ADJ and Fine Picture features are available
only when the “Auto Picture” is off.
* The AUTO PICTURE, FINE PICTURE and PICTURE
ADJ. are available only for RGB signals.
Restoring the factory default settings
To restore the original factory settings, go back to the
MAIN MENU. Select “FUNCTION,”and then select
“RESET”. Note that this also restores other settings to
the factory defaults except for Auto Picture.
Function Menu
Setting the on-screen menu
When using the monitor for presentations, etc., the monitor
can be set so that the input source, screen mode, etc., do
not appear.
Example: Turning the on-screen menu mode off
Press the MENU/ENTER button on the remote control to
display the MAIN MENU on the screen, then...
1. Use the ▲ and ▼ buttons to select “FUNCTION”, then
press the MENU/ENTER button.
The “FUNCTION” screen appears.
2. Use the ▲ and ▼ buttons to select “MENU”.
F U N C T I O N
MENU
MENU ADJ.
POWER MGT
GRAY LEVEL
CINEMA MODE
M-LINK ADJ.
LONG LIFE
RESET
: ON
: 1
: OFF
: 3
: ON
: 1
SEL. ADJ. RETURN EXIT
3. To turn the on-screen menu mode off ...
Use the and buttons to select “OFF”.
The mode switches as follows each time the or
button is pressed:
ON OFF
F U N C T I O N
MENU
MENU ADJ.
POWER MGT
GRAY LEVEL
CINEMA MODE
M-LINK ADJ.
LONG LIFE
RESET
: OFF
: 1
: OFF
: 3
: ON
: 1
SEL. ADJ. RETURN EXIT
4. Once the setting is completed ...
Press the EXIT button to return to the main menu.
To delete the main menu, press the EXIT button once
more.
Information
MENU modes
ON .................. The on-screen menu appears.
OFF ................ The on-screen menu does not appear.
Restoring the factory default settings
To restore the original factory settings, go back to the
MAIN MENU. Select “FUNCTION,”and then select
“RESET”. Note that this also restores other settings to
the factory defaults.