MITSUBISHI ELECTRIC PD-5010 User Manual
Page 40
34
* The “WORKING TIME” (minutes) and “WAITING
TIME” cannot be set when the “WORKING TIME” is
“ON”.
The 2nd line of the “WORKING TIME”:
0M
3M 6M 9M ...
57M
The 1st line of the “WAITING TIME”:
0H
1H 2H 3H ...
12H
The 2nd line of the “WAITING TIME”:
0M
3M 6M 9M ...
57M
6. Once the setting is completed...
Press the EXIT button several times to return to the main
menu.
To delete the main menu, press the EXIT button once more.
Information
Setting the time
WORKING TIME
Set the length of time the “INVERSE/WT” mode lasts.
When the WORKING TIME is set to “ON”, the
“INVERSE/WT” mode stays in the on state.
WAITING TIME
Set the length of time until the “INVERSE/WT” mode
starts.
* The “WORKING TIME” and “WAITING TIME” can
be set for up to 12 hours and 45 minutes in units of 3
minutes.
To select “ON” for the “WORKING TIME”...
Set the hours of the WORKING TIME to 0H and the
minutes to 0M. “ON” will be displayed.
Setting the time for “SCREEN WIPER”
Set the “SCREEN WIPER” operation time, “WAITING
TIME”, and “SPEED”.
Example: Setting the SCREEN WIPER mode to start
in 30 minutes and proceeds for one and a half hours.
1. Use the ▲ and ▼ buttons to select “FUNCTION”, then
press the PROCEED button.
The “FUNCTION” screen appears.
2. Use the ▲ and ▼ buttons to select “LONG LIFE”, then
press the MENU/ENTER button.
3. Use the ▲ and ▼ buttons to select “SCREEN WIPER”,
then use the
and buttons to select “ON”.
L O N G L I F E
: AUTO
: OFF
: OFF
:
ON
RETURN
EXIT
PLE
ORBITER
INVERSE
SCREEN WIPER
SEL.
OK
MENU/ENTER
MENU/ENTER
4. Press the MENU/ENTER button.
The “SCREEN WIPER” screen appears.
S C R E E N W I P E R
:
ON
: 1
SEL.
ADJ.
RETURN
EXIT
WORKING TIME
SPEED
WORKING TIME
SPEED
5. Adjust the time and speed using the
and buttons
and the ▲ and ▼ buttons.
The mode switches as follows each time the
and
button is pressed.
S C R E E N W I P E R
:
1H
: 30M
: 0H
: 30M
: 1
SEL.
ADJ.
RETURN
EXIT
WORKING TIME
WAITING TIME
SPEED
WORKING TIME
WAITING TIME
SPEED
The 1st line of the “WORKING TIME”:
0H 1H 2H 3H ... 12H
* The “WORKING TIME” (minutes) and “WAITING
TIME” cannot be set when the “WORKING TIME”
is “ON”.