MITSUBISHI ELECTRIC PD-5010 User Manual
Page 41
35
Resetting to the default values
Use these operations to restore all the picture adjustments
and audio settings to the factory default values.
Refer to page 19 for items to be reset.
Press the MENU/ENTER button on the remote control to
display the MAIN MENU on the screen, then...
1. Use the ▲ and ▼ buttons to select “FUNCTION”, then
press the MENU/ENTER button.
The “FUNCTION” screen appears.
2. Use the ▲ and ▼ buttons to select “RESET”, then press
the MENU/ENTER button.
F U N C T I O N
: ON
: 1
: OFF
: 3
: ON
: 1
RETURN
EXIT
MENU
MENU ADJ.
POWER MGT
GRAY LEVEL
CINEMA MODE
M-LINK ADJ.
LONG LIFE
RESET
SEL.
OK
MENU/ENTER
MENU/ENTER
The “RESET” screen appears.
3. Use the ▲ and ▼ buttons to select “RESET”, then press
the MENU/ENTER button.
R E S E T
RETURN
EXIT
RESET
RETURN
OK
MENU/ENTER
R E S E T
S E T T I N G N O W
R E S E T
S E T T I N G N O W
When the “SETTING NOW” screen disappears, the
screen will be restored to the previous “RESET” mode,
then all the settings are restored to the default values.
4. Once the setting is completed ...
Press the EXIT button.
To delete the main menu, press the EXIT button once
more.
The 2nd line of the “WORKING TIME”:
0M
3M 6M 9M ...
57M
The 1st line of the “WAITING TIME”:
0H
1H 2H 3H ... 12H
The 2nd line of the “WAITING TIME”:
0M
3M 6M 9M ... 57M
“SPEED”
1 2 3 4 5
6. Once the setting is completed...
Press the EXIT button several times to return to the
main menu.
To delete the main menu, press the EXIT button once
more.
Information
Setting the time
WORKING TIME
Set the length of time the “SCREEN WIPER” mode
lasts.
When the WORKING TIME is set to “ON”, the
“SCREEN WIPER” mode stays in the ”ON” state.
WAITING TIME
Set the length of time until the “SCREEN WIPER”
mode starts.
SPEED
Set the moving speed for the “SCREEN WIPER”. The
speed decreases as the number increases.
* The “WORKING TIME” and “WAITING TIME” can
be set for up to 12 hours and 45 minutes in units of 3
minutes.
To select “ON” for the “WORKING TIME”...
Set the hours of the WORKING TIME to 0H and the
minutes to 0M. “ON” will be displayed.