MITSUBISHI ELECTRIC PD-5010 - Manual (Page 30)

24
4. Once the setting is completed ...
Press the EXIT button to return to the main menu.
To delete the main menu, press the EXIT button once
more.
Information
NR
* “NR” stands for Noise Reduction.
* This function reduces noise in the picture.
Types of noise reduction
There are three types of noise reduction. Each has a
different level of noise reduction.
The effect becomes stronger as the number increases
(in the order
NR-1 NR-2 NR-3 ).
OFF .................... Turns the noise reduction function off.
Reducing noise in the picture
Use these settings if the picture has noise due to poor
reception or when playing video tapes on which the picture
quality is poor.
Example: Setting “NR-3”
Press the MENU/ENTER button on the remote control to
display the MAIN MENU on the screen, then...
1. Use the ▲ and ▼ buttons to select “VIDEO
SETTINGS”, then press the MENU/ENTER button.
The “VIDEO SETTINGS” screen appears.
2. Use the ▲ and ▼ buttons to select “NR”.
V I D E O S E T T I N G S
: MEMORY
: MEDIUM
: OFF
R G
SEL. ADJ. RETURN EXIT
CONTRAST
BRIGHTNESS
SHARPNESS
COLOR
TINT
PICTURE MODE
COLOR TEMP.
NR
CONTRAST
BRIGHTNESS
SHARPNESS
COLOR
TINT
PICTURE MODE
COLOR TEMP.
NR
3. Use the and buttons to select “NR-3”.
The mode switches as follows when the and buttons
are pressed:
OFF NR-1 NR-2 NR-3
NR NR-3 :
* If neither the or button is pressed within 5 seconds,
the current selection is set and the previous screen
reappears.