MITSUBISHI ELECTRIC PD-5010 - Manual (Page 27)

21
4. Once the adjustment is completed ...
Press the EXIT button to return to the main menu. To
delete the main menu, press the EXIT button once more.
Information
Types of picture modes
MEMORY ........ The last picture adjustments are stored
here.
THEATER ....... Set this mode when watching video in
a dark room.
This mode provides darker, finer
pictures, like the screen in movie
theaters.
CONTRAST = 80% for RESET mode
BRIGHTNESS = 95% for RESET
mode
NORMAL ........ Set this mode when watching video in
a bright room.
This mode provides dynamic pictures
with distinct differences between light
and dark sections.
CONTRAST = 96% for RESET mode
RESET ............ Use this to reset the picture to the
factory default settings. No adjustments
to contrast, brightness, sharpness, color
or tint can be made in this mode.
Setting the picture mode according to the
brightness of the room
There are four picture modes that can be used effectively
according to the environment in which you are viewing
the display.
Example: Setting the “THEATER” mode
Press the MENU/ENTER button on the remote control to
display the MAIN MENU on the screen, then...
1. Use the ▲ and ▼ buttons to select “VIDEO
SETTINGS”, then press the MENU/ENTER button.
The “VIDEO SETTINGS” screen appears.
2. Use the ▲ and ▼ buttons to select “PICTURE MODE”.
V I D E O S E T T I N G S
: MEMORY
: MEDIUM
: OFF
R G
SEL. ADJ. RETURN EXIT
CONTRAST
BRIGHTNESS
SHARPNESS
COLOR
TINT
PICTURE MODE
COLOR TEMP.
NR
CONTRAST
BRIGHTNESS
SHARPNESS
COLOR
TINT
PICTURE MODE
COLOR TEMP.
NR
3. To set to “THEATER” ...
Use the and buttons to select “THEATER”.
The mode switches as follows when the and
buttons are pressed:
MEMORY THEATER NORMAL RESET
PICTURE MODE THEATER :
* If neither the or button is pressed within 5 seconds,
the current selection is set and the previous screen
reappears.