MITSUBISHI ELECTRIC PD-5010 - Manual (Page 26)

20
Picture Settings Menu
Adjusting the picture
The contrast, brightness, sharpness, color and tint can be
adjusted as desired.
Example: Adjusting the contrast
Press the MENU/ENTER button on the remote control to
display the MAIN MENU on the screen, then...
1. Use the ▲ and ▼ buttons to select “VIDEO
SETTINGS”, then press the MENU/ENTER button.
The “VIDEO SETTINGS” screen appears.
2. Use the ▲ and ▼ buttons to select “CONTRAST”.
V I D E O S E T T I N G S
CONTRAST
BRIGHTNESS
SHARPNESS
COLOR
TINT
PICTURE MODE
COLOR TEMP.
NR
: MEMORY
: MEDIUM
: OFF
R G
SEL. ADJ. RETURN EXIT
3. Use the or buttons to adjust the contrast.
CONTRAST
* If neither the or button is pressed within 5 seconds,
the current setting is set and the previous screen
reappears.
4. Once the adjustment is completed ...
Press the EXIT button to return to the main menu.
To delete the main menu, press the EXIT button once
more.
Note: If “CAN NOT ADJUST” appears ...
When trying to enter the VIDEO SETTINGS submenu,
make sure PICTURE MODE is not set to RESET.
Information
VIDEO SETTINGS screen
CONTRAST ...... Changes the picture’s contrast.
BRIGHTNESS .. Changes the picture’s brightness.
SHARPNESS .... Changes the picture’s sharpness.
Adjusts picture detail of VIDEO
display.
COLOR ............. Changes the color density.
TINT .................. Changes the picture’s tint. Adjust for
natural colored skin, background, etc.
Adjusting the computer image
Only the contrast and brightness can be adjusted when
a computer signal is connected.
Restoring the factory default settings
Select “RESET” under the “PICTURE MODE” settings.