MITSUBISHI ELECTRIC PD-5010 - Manual (Page 38)

32
Reducing uneven aging of the screen
The brightness of the screen, the position of the picture,
positive/negative mode and screen wiper are adjusted to
reduce uneven phosphor aging of the screen.
Example: Setting “PLE” to “LOCK”
Press the MENU/ENTER button on the remote control to
display the MAIN MENU on the screen, then proceed as
follows.
1. Use the ▲ and ▼ buttons to select “FUNCTION”, then
press the MENU/ENTER button.
The “FUNCTION” screen appears.
2. Use the ▲ and ▼ buttons to select “LONG LIFE”, then
press the MENU/ENTER button.
F U N C T I O N
: ON
: 1
: OFF
: 3
: ON
: 1
RETURN EXIT
MENU
MENU ADJ.
POWER MGT
GRAY LEVEL
CINEMA MODE
M-LINK ADJ.
LONG LIFE
RESET
SEL. OK MENU/ENTER MENU/ENTER
The “LONG LIFE” screen appears.
3. Use the ▲ and ▼ buttons to select “PLE”.
L O N G L I F E
: AUTO
: OFF
: OFF
: OFF
SEL. ADJ. RETURN EXIT
PLE
ORBITER
INVERSE
SCREEN WIPER
PLE
ORBITER
INVERSE
SCREEN WIPER
4. Use the and buttons to select “LOCK”.
The mode switches as follows each time the or
button is pressed:
AUTO LOCK
L O N G L I F E
: LOCK
: OFF
: OFF
: OFF
SEL. ADJ. RETURN EXIT
PLE
ORBITER
INVERSE
SCREEN WIPER
PLE
ORBITER
INVERSE
SCREEN WIPER
Setting MONITORLINK (M-LINK) ADJ.
When the picture input from the MONITORLINK input
terminal is distorted, select the most appropriate setting
from among “1”, “2”, and “3”.
Example: Setting “2”
Press the MENU/ENTER button on the remote control to
display MAIN MENU on the screen, then...
1. Use the ▲ and ▼ buttons to select “FUNCTION”,
then press the MENU/ENTER button.
The “FUNCTION” screen appears.
2. Use the ▲ and ▼ buttons to select “M-LINK ADJ.”.
F U N C T I O N
: ON
: 1
: OFF
: 3
: ON
: 1
SEL. ADJ. RETURN EXIT
MENU
MENU ADJ.
POWER MGT
GRAY LEVEL
CINEMA MODE
M-LINK ADJ.
LONG LIFE
RESET
MENU
MENU ADJ.
POWER MGT
GRAY LEVEL
CINEMA MODE
M-LINK ADJ.
LONG LIFE
RESET
3. To select “2”...
Use the and buttons to select “2”.
The mode switches as follows each time the or
buton is pressed:
1 2 3
F U N C T I O N
: ON
: 1
: OFF
: 3
: ON
: 2
SEL. ADJ. RETURN EXIT
MENU
MENU ADJ.
POWER MGT
GRAY LEVEL
CINEMA MODE
M-LINK ADJ.
LONG LIFE
RESET
MENU
MENU ADJ.
POWER MGT
GRAY LEVEL
CINEMA MODE
M-LINK ADJ.
LONG LIFE
RESET
4. Once the setting is completed...
Press the EXIT button to return to the main menu.
To delete the main menu, press the EXIT button once
more.
Information
NOTE: M-LINK ADJ is available only after
proprietary tuner/controller has been connected.
When you adjust the M-LINK ADJ.
The position of the menu display will change. In such
a case, be sure to adjust the position.
Restoring the factory default settings
To restore the original factory settings, go back to the
MAIN MENU. Select “FUNCTION,”and then select
“RESET”. Note that this also restores other settings to
the factory defaults.