Multi-Tech Systems Multi-Tech FaxFinder FF820 - Manual (Page 91)

Chapter 5: FaxFinder Client Software Operation
Multi-Tech Systems, Inc. FaxFinder Admin User Guide 91
She could “delete” the fax, which means that that fax transmission would never be completed.
Pause is canceled on reboot . If she shuts down her computer for the day while leaving this fax in a
“pending” state, that fax will be sent shortly after booting up her computer again, that is shortly after the
FaxFinder client software is functioning again. So, any faxes put in the pending state by using the
‘Pause Scheduler’ command will be sent the next time the FaxFinder software is activated.
Canceling a Fax
If the fax is in progress … Open the FaxFinder Fax Client Software. On the Device Status tab, select
the FaxFinder unit that is in the process of sending your fax. In the list, right-click on that FaxFinder entry.
In the menu that appears, select Abort.
If the fax is pending … Open the FaxFinder Fax Client Software. On the Pending Faxes tab, select the
fax transmission that you want to cancel. In the list, right-click on that fax message entry (the recipient
will be shown). In the menu that appears, select Delete.
To cancel the current fax and simultaneously put a hold on sending any other faxes from your PC, select
Abort and Pause
. To resume faxing, go to the File menu and cancel the pause by selecting Pause
Scheduler . Any pause applied to a pending fax is cancelled when the computer is rebooted. Any fax left
pending with the FaxFinder Scheduler paused will be sent as soon as the FaxFinder client program
opens when the PC is turned on again.