MITSUBISHI ELECTRIC R100 - Manual (Page 76)

3. Utilities
76 R100 Wireless Gateway
Chapter 3 - Software Configuration
(5) Find your manufacturer and model. Click
Have Disk if you cannot find your printer in
the list and use the driver provided with your
printer.
(6) Click Next to set this as your default printer.
(3) Choose Local printer attached to this
computer.
(4) Choose Remote Port (Printer Sharing
Port). If this is not available, select LPT1*. You
can select a USB port later in the Printer
Setup Wizard if you are using a USB
printer.
* the R100 also supports standard based network printing protocol,
called LPR, which is also supported by Windows XP, Windows 2000,
MAC or Unix based systems. If you are a Windows XP user, please
refer to Setup for LPR client under Windows XP for setting up as a LPR
client.