Chapter 3 - software configuration – MITSUBISHI ELECTRIC R100 User Manual
Page 30

3. Utilities
30
R100 Wireless Gateway
Chapter 3 - Software Configuration
proposed TKIP (Temporal Key Integrity Protocol) or AES (Advanced
Encryption Standard) encryption schemes are applied.
TKIP: TKIP uses an encryption algorithm which is more stringent
than the WEP algorithm and also uses existing WLAN calculation
facilities to perform encryption operations. TKIP verifies the security
configuration after the encryption keys are determined.
AES: AES is a symmetric 128-bit block data encryption technique
which works simultaneously on multiple network layers.
64/128-bit versus 40/104-bit
The following section explains low-level (64-bit) and high-level (128-
bit) WEP Encryption schemes:
64-bit WEP Encryption
Authentication
Method
Encryption
Passphrase
WEP Key 1~4
Open or shared key
None
Not required
Not required
WEP-64 bits
1~64 characters
10 hex
WEP-128 bits
1~64 characters
26 hex
Shared key
WEP-64 bits
1~64 characters
10 hex
WEP-128 bits
1~64 characters
26 hex
WPA-PSK
^
TKIP only *
8~63 characters
Not required
AES only *
8~63 characters
Not required
WPA
^
TKIP only *
Not required
Not required
AES only *
Not required
Not required
Radius with 802.1x
^
Auto
Not required
Not required
WEP-64 bits
1~64 characters
10 hex
WEP-128 bits
1~64 characters
26 hex
*
R100 supports AES and TKIP encryption for WPA.