MITSUBISHI ELECTRIC R100 - Manual (Page 13)

1. Introduction
R100 Wireless Gateway 13
Chapter 1 - Introduction
LED Indicators
The LEDs on the front of the R100 Wireless Gateway display the
status of the device.
PWR (Power)
Off
No power
On System ready
Flashing Firmware upgrade failed
AIR (Wireless Network)
Off
No power
On Wireless system ready
Flashing Transmitting or receiving data (wireless)
WAN (Wide Area Network)
Off
No power
On Has physical connection to an Ethernet WAN
Flashing Transmitting or receiving data (through Ethernet wire)
LAN 1-4 (Local Area Network)
Off
No power
On Has physical connection to an Ethernet LAN
Flashing Transmitting or receiving data (through Ethernet wire)