Wall mounting option – MITSUBISHI ELECTRIC R100 User Manual
Page 16
Chapter 2 - Installation
2. Installation
16
R100 Wireless Gateway
Wall Mounting Option
Out of the box, the R100 Wireless Gateway is designed to sit on a
raised flat surface like a file cabinet or book shelf. The unit may also
be converted for mounting to a wall or ceiling.
Follow these steps to mount the R100 Wireless Gateway to a wall:
1. Look on the underside for the four mounting hooks.
2. Mark two upper holes in a flat surface using the provided hole template.
3. Tighten two screws until only 1/4” is showing.
4. Latch the upper two hooks of the wireless gateway onto the screws.
Note: Readjust the screws if you cannot latch the gateway onto the
screws or if it is too loose.