MITSUBISHI ELECTRIC R100 - Manual (Page 58)

3. Utilities
58 R100 Wireless Gateway
Chapter 3 - Software Configuration
Banned IP List
Setting
This screen enables you to enter IP addresses that
you do not want users connected to the gateway to
access.
IP Address – This field indicates the IP address you want to ban.
Enter a specific IP address, such as 192.168.1.5, or IP addresses
within one subnet, such as 192.168.*.*, or 192.168.1.*.
Client Setting
Users can connect to the FTP server using a Web based browser
such as IE or Netscape. To connect to the server, type the FTP URL
in the browser address bar: ftp://username@[IP address or host name
of the gateway]/
Using other FTP-protocol programs, you can connect to the FTP Server
using either PASV or PORT.
Note: The FTP Server only supports “No encrypted password” pro-
tection. Clients connecting with MD4 or MD5 will not be allowed
access.