MITSUBISHI ELECTRIC R100 - Manual (Page 45)

3. Utilities
R100 Wireless Gateway 45
Chapter 3 - Software Configuration
IP Config
Click on the IP Config button on the menu to reveal
the submenu. Follow the instructions to set up the
R100 Wireless Gateway. Tips are displayed when you
move your cursor over an item.
Miscellaneous
Enable UPnP – If you select Yes
to enable UPnP, it will allow your
Wireless Gateway to be found
automatically by systems, such as
Windows XP. It also allows these
systems to automatically
configure the Wireless Gateway
for various Internet applications,
such as gaming and video
conferencing.
Remote Log Server – This feature allows you to assign a remote server
to record log messages from the R100. If you leave it blank, the system
will only record up to 1024 messages on the R100.
Time Zone – This field indicates the time zone where you are located.
NTP Server – NTP Server is a time server on the Internet that allows the
wireless gateway to synchronise the system time with it. You can keep
the default IP address or set to the IP address of a NTP server that you
prefer.