Wireless – MITSUBISHI ELECTRIC R100 User Manual
Page 37
3. Utilities
R100 Wireless Gateway
37
Chapter 3 - Software Configuration
Wireless
Click on the Wireless button on the menu to reveal the
submenu. Follow the instructions to set up the R100
Wireless Gateway. Tips are displayed when you move
your cursor over an item.
This section allows you to set up
additional parameters for
connection with a RADIUS Server.
Values are required for this page
when the Authentication Method
field in the Wireless - Interface
section is set as WPA or Radius
with 802.1x. Refer to
Authentication Method on page
29.
Server IP Address – specifies the IP address of the RADIUS server
to use for 802.1X wireless authentication and dynamic WEP key
derivation.
Server Port – specifies the UDP port number used by the RADIUS
server.
Connection Secret – specifies the password used to initialise a
RADIUS connection.
Note: A RADIUS server is used for remote user authentication and
accounting. It is primarily used by Internet Service Providers, but
can also be used on any network that needs a centralized authenti-
cation function for its workstations.
Radius Setting