Turn bluetooth power on or off, Make phone visible to other device – Motorola Z6C User Manual
Page 67
65
connections
Phone Book Access Profile (PBAP)—Makes
information from a mobile phone’s phonebook
available to a handsfree device.
CDMA network only
Dial Up Networking (DUN)—Provides a standard to
access the Internet and other dial-up services with a
Bluetooth wireless connection.
Serial Port Profile (SPP)—Defines the protocols and
procedures to be used by devices using Bluetooth
connections for RS232 (or similar) serial cable
emulation.
turn Bluetooth power on or off
1
Press the center select key (
s
) to open the
menu.
2
Use the navigation key (
S
) to scroll to
D
SETTINGS & TOOLS.
3
Scroll to Bluetooth Menu and press the center select
key (
s
) (OK).
4
Press the left soft key (
-
) to turn Bluetooth
power on or off.
Note: To extend battery life, use this procedure to set
Bluetooth power to Off when not in use. Your phone
will not connect to devices until you set Bluetooth
power back to On and connect your phone with the
device again.
make phone visible to other
device
Allow an unknown Bluetooth device to discover your
phone:
1
Press the center select key (
s
) to open the
menu.
2
Use the navigation key (
S
) to scroll to
D
SETTINGS & TOOLS.